What is metal stamping parts? Metal stamping parts detection methods?


Some steel or non-ferrous metal machined parts, processing methods: cold / hot stamping, extrusion, rolling, welding, cutting, etc. also includes some other process, is defined more widely.
Stamping:
Metal processing which is the most used, refers to the room temperature, steel / non-ferrous metals such as sheet metal mold, and molded into a prescribed shape to provide the desired working pressure by the press.
Metal stamping parts
Widely used in various fields of life among us, including some electronics, auto parts, decorative materials and so on. We usually say that generally refers to the stamping of cold stamping parts, for example, a piece of iron, trying to turn it into a fast food dish, it would have to design a mold, the mold is Face plate shape, this iron mold pressure, it becomes a dish you want, this is the cold pressing, is the direct use of the metal mold material stamping.
Metal stamping parts hardness testing Rockwell hardness. Small, stampings having a complicated shape can be used to test the plane is small, it can not be detected on a normal desktop Rockwell hardness.
Stamping parts processing including punching, bending, deep drawing, forming, finishing and other processes. Stamping parts processing materials are mainly hot-rolled or cold-rolled (cold-rolled-based) of the metal strip material, such as carbon steel, alloy steel plates, spring steel, galvanized sheet, tin plate, stainless steel, copper and copper alloy panels, aluminum and aluminum alloy plates.
PHP Series Portable Superficial Rockwell hardness tester is suitable for testing the hardness of these stampings. Alloy metal stamping parts processing, machinery manufacturing the most commonly used parts. Die stamping parts processing is the use of metal strip forming separation occurs or processing methods. Its range of applications is very broad.
Stamping material hardness testing, its main purpose is to determine the extent of sheet metal annealing purchased suitability stamping parts processing to be carried out subsequently, different kinds of stamping parts processing, require different levels of hardness plate. Aluminum alloy plate for stamping parts available Webster Hardness testing, the material thickness is greater than 13mm can use bar hardness, low hardness of pure aluminum or aluminum alloy sheet should Barcol.
In the stamping industry, sometimes also called stamping sheet metal forming, but slightly different. Refers to the so-called sheet metal forming sheet metal, thin-walled tubes, thin profiles, such as raw materials for molding plastic working collectively referred to as sheet metal forming, at this time, the direction of deformation of the slab is generally not important consideration.

Dongguan Taike Metal Electronic Co., Ltd. all rights reserved © Copyright
Contacts:Mr. Liao/+86-13725880702  Tel: +86-769-26628832
*Site and part of the creative resources from the Internet, if infringement please inform us, we will remove within 24 hours* [admin] Technical Support:Dongguan Website